How do I fix a MYX bike tablet that keeps spinning and restarting?
Answer
Unplug the bike and tablet from power completely for several minutes, then power back on; if the reboot loop continues, a factory reset or MYX support replacement path may be required.
Before you start: stop right away if…
- Software recovery or factory reset can sign you out and remove local bike preferences.
- Keep the console dry and unplug before handling power connections.
Follow these steps
Fully unplug the bike
Unplug the MYX bike and tablet power from the wall outlet completely and leave it unplugged for 5 to 10 minutes.
You should see: All power drains from the console.
Power on and observe
Plug the bike back in, start it, and watch whether the tablet reaches the home screen or returns to the spinning restart loop.
You should see: The tablet boots normally, or the loop continues.
Retry a second clean power cycle
If it still loops, unplug again for several minutes, ensure the power cord is firmly seated, and start once more.
You should see: A stable boot occurs, or the failure looks consistent enough for support.
Contact MYX support for reset or service
If the spinning restart continues with no error code, contact MYX support for guided recovery, software reinstall, or tablet service options.
You should see: Support provides a reset procedure or replacement guidance.
Not sure this is the right page? Check here
0 of 5 checked
Extra tips
What to look for: Continuous spinning loader, automatic restarts, absence of error codes, and whether the tablet ever reaches the workout home screen
Before you change anything: Note any account email used on the bike. Unplug safely and keep liquids away from the console. A factory reset can remove locally stored preferences. Have space around the bike to reach the power cord.