How do I stop a Moto G Stylus from talking and unlock the screen?
Answer
This usually means TalkBack or another accessibility screen reader is on. Holding both volume keys briefly, then turning TalkBack off under Accessibility, often restores normal unlock and touch control.
Before you start: stop right away if…
- Avoid a factory reset just to stop the voice; that can erase data and is rarely needed for TalkBack.
Follow these steps
Try the volume-key TalkBack shortcut
Hold the Volume Up and Volume Down keys together for a few seconds, then release. Listen for a spoken confirmation that TalkBack stopped or started.
You should see: TalkBack turns off, or you hear a clear message about TalkBack status.
Unlock with two-finger gestures if needed
If the phone is still speaking, swipe with two fingers to move between screens and double-tap with one finger to select. Unlock using your PIN or pattern with those gestures.
You should see: You can reach the home screen or Settings even while TalkBack is on.
Open Accessibility settings
Open Settings, then Accessibility (or Accessibility & safety). Use two fingers to scroll if TalkBack is still active.
You should see: You see TalkBack, Screen reader, or similar accessibility options.
Turn TalkBack off
Open TalkBack or Screen reader, then turn it off. Confirm if the phone asks you to verify the change.
You should see: Spoken feedback stops and single-finger taps and unlock work normally again.
Not sure this is the right page? Check here
0 of 5 checked
Extra tips
What to look for: Spoken feedback when you touch the screen, announcements of the time or buttons, and an Accessibility or TalkBack option in Settings.
Before you change anything: Confirm the phone is a Motorola Moto G Stylus on Android. Note whether the voice started after an accidental button press or an Accessibility change. Do not factory reset until accessibility options are checked. Never share unlock PINs, passwords, or one-time codes with unexpected callers.