How do you turn off the alarm on an SKMEI 1100 watch?
Answer
On most SKMEI 1100-style digital watches you enter the alarm mode with the Mode button, then use the Adjust or light/set button combination to turn the alarm indicator off rather than deleting the time.
Before you start: stop right away if…
- Forcing buttons or prying the case can damage the watch or its water resistance.
Follow these steps
Go to alarm mode
Press the Mode button repeatedly until the alarm time screen appears. Many SKMEI 1100 watches show AL or a bell icon on this screen.
You should see: The display shows the alarm time instead of the normal clock.
Toggle the alarm off
While the alarm screen is showing, press the Adjust or Light/Set button (whichever your model uses to arm alarms) until the AL, ALM, or bell indicator disappears.
You should see: The alarm indicator turns off, meaning the stored time will not sound.
Return to the time display
Press Mode until the normal hour-and-minute display returns, then wait past the old alarm time or advance a test if your model allows it.
You should see: The watch stays silent at the former alarm time and no AL icon remains on the main screen.
Silence a sounding alarm
If the alarm is beeping right now, press any side button once to stop the current alert, then repeat the steps above so it does not repeat the next day.
You should see: The beeping stops immediately, and with the indicator off it should not return tomorrow.
Not sure this is the right page? Check here
0 of 5 checked
Extra tips
What to look for: An AL, ALM, or bell icon on the display, and Mode / Adjust / Light button labels on the watch case.
Before you change anything: Confirm the dial or case says SKMEI 1100 or a very similar SKMEI digital model. Note which button is Mode versus Adjust before changing settings. Avoid pulling the crown hard if this is a button-only digital watch. Do not pay anyone remotely to “reset” a simple watch alarm.