How do I fix a Philips DreamStation 2 with a blinking light?
Answer
Unplug the power converter and the DreamStation 2 completely for about one minute, then reconnect power firmly and check whether the blinking stops. If the light returns with no code, inspect the power brick and outlet, then contact the equipment supplier or Philips support for a power-check path.
Before you start: stop right away if…
- Do not open the DreamStation 2 or modify the power supply; that can create an electrical hazard and may void warranty coverage.
- This is medical equipment. If therapy cannot be delayed, ask the prescribing supplier for a loaner while the unit is checked.
Follow these steps
Power-cycle the machine
Unplug the converter from the wall and disconnect power from the DreamStation 2 completely. Wait one full minute, then reconnect the converter to the wall and to the machine firmly.
You should see: The machine powers on normally, or the blinking pattern changes to a clearer status.
Check the power path
Try a different wall outlet, confirm the converter cable is fully seated, and look for damage on the power brick or cord. Avoid extension cords if possible for this test.
You should see: The unit stays powered with a steady ready state, or blinking continues on every outlet.
Note what the display shows
After reconnecting, watch for any Check Power message, blank screen, or repeated blink with no code, and write down what you see.
You should see: You have a short description to give the supplier or Philips support.
Contact equipment support
If blinking continues with no usable therapy screen, contact the durable medical equipment supplier or Philips support for DreamStation 2 power troubleshooting or replacement guidance.
You should see: Support confirms next steps for a power supply or unit check.
Not sure this is the right page? Check here
0 of 5 checked
Extra tips
What to look for: Whether any error code appears, whether the front panel stays dark besides the blink, and a Check Power style prompt if the display shows one.
Before you change anything: Confirm the device is a Philips DreamStation 2 and note the exact light pattern. Unplug only at the wall and device connectors; do not open the machine. Have the power converter and hose connections where you can see them. If this is prescribed medical equipment, follow your supplier’s guidance before extended downtime.